CÔNG TY KỸ THUẬT AN TOÀN
CÔNG TY KỸ THUẬT AN TOÀN
The portable DSPA 5-series aerosol generators
The portable DSPA 5-series aerosol generators can be used by fire fighters and professional first responders as a highly effective knock down tool against fires. The DSPA 5-series generators are non-pressurized and are deployed manually into a room or compartment that requires firefighting. After activation, an aerosol cloud is generated, which expands volumetrically, flooding the space and knocking down the flames. The DSPA 5-series generators are mainly designed to use on class A, B, C and F (K) fires.
Application:
The DSPA 5-series generators are recommended for firefighting in buildings and other structures. It can be used in every stage fire, but its value is best displayed during fully developed fires or early deployment in any fire. The DSPA 5M generator is recommended for firefighting in marine applications and other situations where moisture and salt have their impact. It can be used in every fire stage, but its value is best displayed during fully developed fires..
DSPA 8-1, DSPA 8-1-60 and DSPA 8-2
The DSPA generators 8-1, 8-1-60 and 8-2 are recommended for the protection of large compartments against fire, such as storage rooms, archives, technical rooms and server rooms. The DSPA 8-1-60 has a very quick discharge time of under 60 seconds, DSPA 8-1 and DSPA 8-2 have a slower discharge time and therefore less pressure built-up.
DSPA 8-1 DSPA 8-1-60 DSPA 8-2
Dimensions Ø220 x 235 mm Ø220 x 235 mm Ø220 x 360 mm
Total weight 12 kg 12 kg 14 kg
Compound weight 3250 g 3250 g 6700 g
Volume coverage 31.65 m3 31.65 m3 65.24 m3
Discharge time 78 sec 48 – 58 sec 140 sec
DSPA aerosol generators can be used as a part of a highly effective fire extinguishing system. A DSPA generator is non-pressurized and is installed inside a room or compartment that requires protection. After activation, an aerosol cloud is generated, which expanse volumetrically, flooding the space and extinguishing the fire. The DSPA generators are mainly designed to use in normally unoccupied and unoccupied areas and are effective on class A, B, C and F (K) fires.
DSPA 11-1, DSPA 11-2 and DSPA 11-3
The DSPA generators 11-1, 11-2 and 11-3 are recommended for the protection of narrow compartments or objects, such as suspended ceilings, raised floors, cable ducts, transport vehicles, switchgears etc.
DSPA 11-1 DSPA 11-2 DSPA 11-3
Dimensions 122 x 22 mm 124 x 34 mm 133 x 54 mm
Total weight 550 g 800 g 1300 g
Compound weight 110 g 170 g 300 g
Volume coverage 1.07 m³ 1.66 m³ 1.92 m³
Discharge time 6-10 giây 9-15 giây 14-26 giây
DSPA 11-4 and DSPA 11-7
The DSPA generator 11-4 and 11-7 is recommended for the protection of semi large compartments such as storage rooms, archives, technical rooms and server rooms.
DSPA 11-4 DSPA 11-7
165 x 72 mm 165 x 72 mm
2000 g 2000 g
900 g 520 g
7 - 21 m³ 4 - 11 m³
19-31 giây 30-50 giây
Dimensions
Total weight
Compound weight
Volume coverage
Discharge time
DSPA 11-5 and DSPA 11-6
The DSPA generator 11-5 and 11-6 are recommended for the protection of semi large compartments such as storage rooms, archives, technical rooms and server rooms.
Dimensions
Total weight
Compound weight
Volume coverage
Discharge time
DSPA 5 DSPA-6
217 x 99 mm 217 x 99 mm
4000 g 4500 g
1400 g 2300 g
13,63 m³ 22,40 m³
40-60 giây 30-50 giây
DSPA 12-1 DSPA 12-2 DSPA 12-5
110 x 20 mm 100 x 28 mm 80 x 16 mm
100 g 150 g 70 g
15 g 30 g 5 g
0.15 m³ 0.29 m³ 0.05 m³
9-11 giây 13-15 giây 5-7 giây
Dimensions
Total weight
Compound weight
Volume coverage
Discharge time
DSPA 12 series
Standalone aerosol fire extinguishing units with a thermal starter from the DSPA 12 series (DSPA 12-1, 12-2, 12-3, 12-4, 12-5) are intended to control and extinguish fires of flammable and combustible liquids, solid fuels and electrical equipment, including energized ones. The DSPA 12-1, 12-2, 12-3, 12-4 are also available with an electrical starter that can be connected to a control module.
Application:
The generators are used for fire protection of small volumes (electric cabinets, engine compartments, etc.) and vehicles
DSPA 12-3 DSPA 12-4 120 x 20 mm 120 x 30 mm
500 g 650 g
55 g 110 g
0.54 m³ 1.07 m³
9-11 giây 11-14 giây
DSPA 5M 278 x 220 x 102.6 mm
5500 g
3300 g
up to 150 m³
35 sec
Dimensions
Total weight
Compound weight
Volume coverage
Discharge time
DSPA 5-1
255 x 230 x 106 mm
4800 g
2300 g
To 110 m³
25 sec
DSPA 5-2
272 x 237 x 125 mm
6000 g
3700 g
180 m³
40 giây
DSPA 5-3
135 x 72 mm
1650 g
300 g
15 m³
25 sec
DSPA 5-4
165 x 94 mm
2100 g
900 g
45 m³ 20 sec
Dimensions
Total weight
Compound weight
Volume coverage
Discharge time
DSPA 2-4-1-1 and DSPA 2-4-1-4
The DSPA generators 2-4-1-1 (Built-in) and 2-4-1-4 (Built-up) are recommended for the protection of semi large compartments such storage rooms, archives, technical rooms and server rooms.
172 x 179 mm
4600 g
1600 g
15.85 m³
48-53 giây
Dimensions
Total weight
Compound weight
Volume coverage
Discharge time
DSPA 0.45-2 and DSPA 0.90-2
DSPA 0.45-2 and DSPA 0.90-2 are developed for the protection of small compartments in industrial environments. Mounting by means of 2 magnets with 90N pulling force which can stand up to 3G vibration, therefore they are suitable for use in heavy industrial circumstances. DSPA 0.45-2 and DSPA 0.90-2 are available with electrical activation or thermal activation.
Application:
The DSPA generators 0.45-2 and 0.90-2 are recommended for the protection of very small objects, such as small electrical equipment, airco’s, ventilation, small electrical cabinets and computers. When calculating the volume, the dimensions of the present materials can be deducted..
95 x 36 (x 90) mm 150 x 36 (x 90) mm
155 g 285 g
45 g 90 g
0,44 m³ 0,88 m³
29 sec 57 sec
DSPA 0.45-2 DSPA 0.90-2
